Steering coaxial link is least demanding in the event that you have a removable PL-259 toward one side of it as this will make going through little regions much simpler. In case you're incidentally introducing the radio wire on your vehicle, you can basically course through the entryway jam being mindful so as not to harm the link and afterward directing to the territory where your radio is. On the off chance that you observe that you have additional urge, don't cut it or loop it firmly.another side Take a completely gathered (shell + body) connector.Measure the connector against the RG8 (or comparable) persuade.Take the external covering of the persuade off with a sharp blade.
Pull the plait back the distance by fanning it out. Wrap 3 to 4 turns of Scotch 88 dark tape around the middle conduit dielectric up against the fanned out plait.Utilization wire strippers and expel the staying dielectric from the middle conduit. Introduce the completely amassed PL259 onto the inside conductor and over the 88 tape.
The back of the PL259 body ought to lay on the fanned out shield.Bind the middle conductor.
Fan out the shield and slice it to 1/4" long and overlap over the back of the PL259.
Bind the shield the distance around to the back of the PL259 body.While the back is still hot wrap 2 turns of 88 tape around the welded shield to seal it great.
No comments:
Post a Comment